Filter
Top Products
53
Software
Installation
52
THE SOFTWARE COMPONENTS
5
Software
Installation
Software needed for playing back movies, etc.
Launches the FinePixViewer
software when a camera is
connected.
Software used to read PDF-format documents on a
personal computer. This software is needed to read
the User’s Guides for FinePixViewer.
Creates a FinePix CD Album
(OS-X is not supported).
“Used when you open RAW
files that were photographed
on cameras that support the
RAW file format.”
Used for videoconferencing (Windows only).
Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images
individually or as an index, display the images at full size and perform some basic image processing.
✽ Note that the software configuration differs slightly depending on your operating system.
Connect the camera
with “DSC” selected as
the USB setting
(➡P.63).
Connect the camera
with “PC CAM”
selected as the USB
setting.
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
Allows a digital camera to be
used as a PC Camera.
Acrobat Reader (Macintosh only)
R
QuickTime
USB PC Camera
Driver
Exif Launcher
USB Mass Storage
Driver
ImageMixer VCD
for FinePix
RAW FILE
CONVERTER LE
FinePixViewer
PictureHello
SET–UP
FORMAT
Formatting erases all the frames (files).
Initialize the xD-Picture Card for use in the
camera.
You should copy important files that you do not
want to be erased to your computer or another xD-
Picture Card.
1Press “d” or “c” to select “YES”.
2Press the “MENU/OK” button to erase all the
files and format the xD-Picture Card.
Formatting erases protected files also.
FRAME NO.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
You can check the file number by viewing the
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
●
!
When you change the xD-Picture Card, always switch the
camera off before you open the battery cover. If you open the
battery cover without switching the camera off, the Frame No.
memory may not function.
●
!
File No. run from 0001 to 9999. Once 9999 is exceeded, the
directory number changes from 100 to 101. The maximum
number is 999–9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
If the “®” message appears, see P.75.
File number
Directory number
Frame number
AA
BB
CONT. RENEW
Formatted xD-Picture Card used for both
A and B.
●
!
If the xD-Picture Card already contains image files with file
numbers higher than the highest file number on the last xD-
Picture Card, images are stored beginning from the highest
file number on the current xD-Picture Card.
●
!
If the “å” “˚” “ƒ” or
“
©” message appears before formatting
the media, refer to P.75 and take the appropriate measures.