FujiFilm A310 Digital Camera User Manual


 
39
Advanced
Features
38
f
Top 4-frame Continuous Shooting
In this mode, you can shoot up to 4 frames at
intervals as short as 0.3 seconds. When you take
the shots, the photographed images are displayed
and automatically recorded.
k
Final 4-frame Continuous Shooting
Continuous shooting (at a minimum interval of 0.3
seconds) starts when you press the shutter button
and the camera captures the last 4 frames shot
immediately before you release the shutter button.
If the maximum of 25 shutter operations is reached,
the last 4 frames are captured.
If there is insufficient space on the xD-Picture
Card, the camera records as many of the shots
taken just before the shutter button was released
as will fit on the xD-Picture Card.
Press shutter
button
Max. 25 shots
4 frames
Release shutter
button
!
The time required to record a file is approximately
10 seconds in “
1” mode (for TOP or FINAL 4-frame
continuous shooting).
Use lock pin to lock the focus.
Starting point Point where you want to take the picture
A
A
B
Focus on and the focus is wrong at .
B
FAR
NEAR
Focusing on a Moving Subject
If you press the shutter button down halfway to focus on the subject at the starting point A, the subject
may no longer be in focus when it reaches point B where you want to take the shot.
In such situations, use AF lock to focus on point B beforehand and then lock the focus so that it does
not shift (lock pin).
The lock pin feature is also useful for photographing fast-moving subjects that are difficult to focus on.
The self-timer lamp lights steadily for roughly 5
seconds and then blinks for another 5 seconds,
after which the shot is taken.
A countdown is displayed on the LCD monitor
indicating the time remaining until the picture is
taken.
Self-timer mode is automatically cancelled after
each shot.
3
4
!
To stop the self-timer, once it has started running, press the
“BACK” button.
1
This mode can be selected in the “a”, still
photography modes.
Select the continuous shooting mode you want to
use.
2
If you select Continuous Shooting mode (excluding
OFF), the selected mode appears on the LCD
monitor.
f: Top 4-frame Continuous Shooting
k: Final 4-frame Continuous Shooting
Notes on Using the Continuous Shooting Modes
h ” appears on the LCD monitor during shooting.
h The shots should be taken using the viewfinder.
h The results of the shot are displayed even when “IMAGE DISP.” is set to OFF (P.50).
h Shooting continues for as long as you hold down the shutter button.
h If there is insufficient space on the xD-Picture Card, as many frames are shot as can be recorded on
the available space.
h The focus and exposure are determined when the first frame is shot and cannot be changed in mid-
sequence.
h The speed of continuous shooting does not change with the quality mode.
h The flash cannot be used as the flash mode is set to Suppressed Flash.
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
f
CONTINUOUS SHOOTING