Filter
Top Products
SCSI ID: 0 to 7, variable by EEPROM: default is 5.
Logical unit number (LUN): 000, fixed
(2) Bus phases
All phases are supported.
(3) Commands
The following commands are supported by this scanner:
f INQUIRY
f OBJECT POSITION
f MODE SELECT
f MODE SENSE
f READ
f RELEASE UNIT
f REQUEST SENSE
f RESERVE UNIT
f SEND
f SEND DIAGNOSTIC
f SET SUBWINDOW
f SET WINDOW
f TEST UNIT READY
A control byte is not supported. If the value other than X©00π is specified, an error
is generated.
(4) Statuses
The following statuses are supported by this scanner:
f BUSY
f CHECK CONDITION
f GOOD
f RESERVATION CONFLICT
4 $ 2