Fujitsu M4000 Security Camera User Manual


 
Preface ix
Preface
This manual describes how to use the shell command which can be executed in the
eXtended System Control Facility (hereinafter referred to as XSCF) environment in
SPARC Enterprise M4000/M5000/M8000/M9000 servers. The shell command is
hereinafter referred to as XSCF shell command.
XSCF is a system monitoring facility to conduct monitoring, control, operation, or
maintenance of main unit and domains of SPARC Enterprise M4000/M5000/M8000/
M9000 servers. It is mounted as a firmware on the service processor which is
independent from the processor of the system. For each command, this manual
describes how to use and the execution examples, available in XSCF environment.
This document is provided as a manual to study the point which you can't understand
or would like to check on, while using XSCF shell command. Instead of reading from
the start as you do so when reading a tutorial, it is recommended to use this manual
as you come across a point you would like to check on.
The description of XSCF shell command written in this manual is the same as the
manual page which appears as a result of man command executed in XSCF
environment. For how to use the man command, please refer to man(1) in this manual.
In addition, for the detail content of XSCF, please refer to SPARC Enterprise M4000/
M5000/M8000/M9000 Servers XSCF User’s Guide.
This section includes:
“Audience” on page x
“Notation of This Manual” on page x
“SPARC Enterprise Mx000 Servers Documentation” on page xii
“Abbreviated References to Other Documents” on page xv
“Models” on page xvi
“Prompt Notations” on page xvi
“Software License” on page xvii
“Fujitsu Welcomes Your Comments” on page xvii