Filter
Top Products
setdcl(8)
System Administration 133
-r Clears the XSB number associated with an LSB number in the
specified domain.
-s option=value Makes settings regarding hardware resources of the XSB
associated with an LSB. An item to be set is specified for option,
and a value corresponding to option is specified for value. option
and value are specified only once in a format using an equal sign
(=) to delimit the specified values. The space character must not
be inserted immediately before and after "=".
One of the following can be specified for option:
policy Degradation range applicable for a detected
error during an initial diagnosis of
hardware.
no-mem Whether to omit the use of memory on a
domain
no-io Whether to omit the use of I/O devices on a
domain
float Whether to set a priority for the board as a
floating board, relative to other boards
If policy is specified for option, either of the following can be
specified for value:
fru Degrades the target part for an error
detected by a diagnosis.
xsb Degrades the target XSB for an error
detected by a diagnosis.
system Degrades the target system for an error
detected by a diagnosis.
If no-mem is specified for option, either of the following can be
specified for value:
true Omits the use of memory on a domain.
false Does not omit the use of memory on a
domain (default).