Fujitsu M4000 Security Camera User Manual


 
setarchiving(8)
114 XSCF Reference Manual Last Revised January 2007
OPTIONS The following options are supported:
-h Displays usage statement.
When used with other options or operands, an error
occurs.
-k host-key Sets the public key that XSCF uses to verify the
identity of the host. Possible values for the host-key
are shown here:
none
This literal value specifies that a public key
should not be used to authenticate the archive
host. If an archive host public key was previously
configured, it is deleted.
download
This literal value specifies that setarchiving
should download the public host key from the
archive host using the SSH protocol. If the -t
option is used, setarchiving downloads the
key from the host specified in the argument to
-t. Otherwise, setarchiving downloads the
key from the current archive host. Next,
setarchiving displays the key’s md5
fingerprint and prompts you for confirmation of
the identity of the host to continue. If you accept
the key, it is saved and used for server
authentication. If you reject the key,
setarchiving exists without changing the
configuration.
public-key
The specified public key is stored and used for
server authentication. The host-key argument
should be the complete public-key for the archive
host, beginning with the key type.
Note – The public-key should be enclosed in quotes to
ensure that the shell treats it as a single word.