Fujitsu M4000 Security Camera User Manual


 
setssh(8)
214 XSCF Reference Manual Last Revised January 2007
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
When a host public key is created, a prompt to confirm execution of the
command with the specified options is displayed. Enter "y" to execute the
command or "n" to cancel the command.
The setssh(8) command can register one user public key at a time.
In time of setssh(8) command execution, finish the input of user public key by
pressing Enter and then pressing Ctrl+D (EOF).
In case the XSCF unit is duplicated configuration, the setting automatically
reflected to the standby XSCF. When there's a defect on the standby XSCF, it
leads to an error.
The current SSH service settings can be checked by using the showssh(8)
command.
In case you enable the ssh service or generated the host public key, XSCF will be
reset.
-c {enable|disable} Specifies whether to enable the SSH service. One of the
following values can be specified:
enable Starts the SSH2 service.
disable Stops the SSH2 service.
-c genhostkey Generates a host public key for SSH2.
-h Displays usage statement. When used with other options
or operands, an error occurs.
-n Automatically answers 'n' (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-s line Specifies the user public key number to delete. For line,
specify the number which displayed after the showssh
-c pubkey command executed. Should be specified with
"-c delpubkey."
-u user_name Specifies the user account name to register or delete the
user public key. Should be specified with "-c
addpubkey"or"-c delpubkey." When the -u option
omitted, the user public key of the current login user
account becomes the target.
-y Automatically answers 'y' (yes) to all prompts.
genhostkey Generates a host public key for SSH2.