Filter
Top Products
addcodlicense(8)
System Administration 11
NAME addcodlicense - add a Capacity on Demand (COD) right-to-use (RTU) license key to
the COD license database
SYNOPSIS addcodlicense license-signature
addcodlicense -h
DESCRIPTION addcodlicense(8) adds the COD RTU specified license key to the COD license
database on the Service Processor. When the license key is added, the quantity of
headroom is reduced by the quantity provided by the license key. The quantity of
headroom cannot be lower than 0.
Note – Before you run this command, you must obtain a COD license key. To
obtain a license key, contact your sales representative. For details on COD RTU
license keys, refer to the COD documentation for your server.
Privileges You must have platadm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
OPERANDS The following operand is supported:
EXAMPLES
EXAMPLE 1 Adding a COD RTU License Key
After this command completes, you will see messages similar to these in the XSCF
console:
EXIT STATUS The following exit values are returned:
-h Displays usage statement.
When used with other options or operands, an error occurs.
license-signature Specifies the COD RTU license key to be added to the COD
license database.
XSCF> addcodlicense \
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
codd 15:51:36: COD PROC Headroom changed to 1
codd 15:51:36: Headroom reduced after adding the license
0 Successful completion.
>0 An error occurred.