Fujitsu M5000 Security Camera User Manual


 
setautologout(8)
System Administration 123
NAME setautologout - set the session timeout time of the XSCF shell
SYNOPSIS setautologout -s timeout
setautologout -h
DESCRIPTION The setautologout(8) command sets the session timeout time of the XSCF shell.
The default of the session timeout time is 10 minutes.
Privileges You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
The specified session timeout time becomes effective after the subsequent login.
EXAMPLES
EXAMPLE 1 Sets the session timeout time of the XSCF shell to 30 minutes.
EXIT STATUS The following exit values are returned:
SEE ALSO showautologout(8)
-h Displays usage statement. When used with other options or
operands, an error occurs.
-s timeout Specifies the session timeout time of the XSCF shell. Specify a
timeout time value in units of minutes for timeout. An integer
ranging from 1 to 255 can be specified.
XSCF> setautologout -s 30
30min
0 Successful completion.
>0 An error occurred.