Filter
Top Products
addboard(8)
System Administration 7
NAME addboard - configure an eXtended System Board(XSB) into the domain
configuration or assign it to the domain configuration
SYNOPSIS addboard [[-q] -{y|n}][-f][-v][-c configure] -d domain_id xsb [ xsb...]
addboard [[-q] -{y|n}][-f][-v] -c assign -d domain_id xsb [ xsb...]
addboard [[-q] -{y|n}][-f][-v] -c reserve -d domain_id xsb [ xsb...]
addboard -h
DESCRIPTION The addboard(8) command, based on domain component list (DCL), configures a
XSB into the domain configuration or assigns it to the domain configuration.
One of the following configuration methods can be specified:
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
configure Configures an XSB into the specified domain configuration. The
incorporated XSB can be accessed from the operating system.
assign Assigns an XSB to the specified domain. The assigned XSB is
reserved for the specified domain and cannot be configured in or
assigned to other domains. The assigned XSB is configured in
the domain by reboot or execution of the addboard(8)
command with "-c configure".
reserve Reserves incorporation of an XSB into the domain configuration.
The action of "reserve" is the same as "assign."
platadm Can run this command for all domains.
domainadm Can run this command only for your managed domains.
-c assign Assigns an XSB to the domain configuration. If the -c option is
omitted, "-c configure" is used.
-c configure Configures an XSB in the domain configuration. If the -c option
is omitted, "-c configure" is used.
-c reserve Reserves incorporation of an XSB into the domain configuration.
If the -c option is omitted, "-c configure" is used.
-d domain_id Specifies the ID of the domain in which an XSB is to be
configured or to which it is to be assigned. domain_id can be 0–23
depending on the system configuration.