Filter
Top Products
showcodusage(8)
250 XSCF Reference Manual • Last Revised January 2007
EXTENDED
DESCRIPTION
The showcodusage -p resource command displays the following COD usage
information for the system:
The showcodusage -p domain command displays the following COD usage
information for each domain:
Resource Identifies the type of COD resources available (processors).
In Use Specifies the number of COD CPUs currently used in the
system.
Installed Specifies the number of COD CPUs installed in the system.
License Specifies the number of COD RTU licenses installed.
Status Specifies one of the following COD attributes:
OK Indicates that there are sufficient licenses
for the COD CPUs in use. Also displays
the number of remaining COD resources
available and the number of any instant
access CPUs (headroom) available.
HEADROOM The number of instant access COD CPUs
in use.
Violation Indicates a COD RTU license violation
exists. Displays the number of COD CPUs
in use that exceeds the number of COD
RTU licenses available. This situation can
occur when you force the deletion of a
COD RTU license key from the COD RTU
license database, but the COD CPU
associated with the license key is still in
use.
Domain/Resource Identifies COD RTU resource (processor) for each domain. An
Unused processor is a COD CPU that has not yet been
assigned to a domain.
In Use Specifies the number of COD CPUs currently used in the
domain.