Fujitsu M5000 Security Camera User Manual


 
version(8)
System Administration 385
NAME version - display firmware version
SYNOPSIS version -c xcp [-v][-t]
version -c {cmu | xscf}[-v]
version -h
DESCRIPTION The version(8) command displays firmware version.
The following versions can be displayed:
Privileges You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:.
EXAMPLES
EXAMPLE 1 Displays the XCP version.
xcp The comprehensive version of the XSCF control package (XCP)
firmware currently applied to the system.
cmu The version of OpenBoot PROM firmware.
xscf The version of XSCF firmware.
-c xcp Displays the XCP version.
-c cmu Displays the version of OpenBoot PROM firmware.
-c xscf Displays the version of XSCF firmware.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-t Displays information of the XCP version that is registered in the
XSCF. This option is used together with "-c xcp".
-v Displays detailed information. Specifying this option with "-c
xscf" displays the same information as the usual information.
XSCF> version -c xcp
XSCF#0 (Active)
XCP0 (Current): 1020
XCP1 (Reserve): 1020
XSCF#1 (Standby)
XCP0 (Current): 1020
XCP1 (Reserve): 1020