Fujitsu M5000 Security Camera User Manual


 
setcod(8)
126 XSCF Reference Manual Last Revised January 2007
COD information, the maximum values allowed are displayed within parentheses
() and default values are displayed within brackets [].
setcod enables COD headroom (processors to be used on demand). Use the -d
domain_id to specify the number of domain COD RTU licenses to be reserved.
EXAMPLES
EXAMPLE 1 Setting COD CPU Headroom Quantity and Reserve Domain COD RTU Li-
censes
EXAMPLE 2 Set the COD Headroom CPUs to 3
After this command completes, you will see a message similar to this one in the
XSCF console:
EXIT STATUS The following exit values are returned:
SEE ALSO addcodlicense(8), showcod(8)
XSCF> setcod
COD
---
PROC RTUs installed: 0
PROC Headroom Quantity (0 to disable, 4 MAX) [0]:
PROC RTUs reserved for domain 0 (0 MAX) [0]:
PROC RTUs reserved for domain 1 (0 MAX) [0]:
PROC RTUs reserved for domain 2 (0 MAX) [0]:
PROC RTUs reserved for domain 3 (0 MAX) [0]:
PROC RTUs reserved for domain 4 (0 MAX) [0]:
PROC RTUs reserved for domain 5 (0 MAX) [0]:
PROC RTUs reserved for domain 6 (0 MAX) [0]:
PROC RTUs reserved for domain 7 (0 MAX) [0]:
PROC RTUs reserved for domain 8 (0 MAX) [0]:
PROC RTUs reserved for domain 9 (0 MAX) [0]:
PROC RTUs reserved for domain 10 (0 MAX) [0]:
PROC RTUs reserved for domain 11 (0 MAX) [0]:
PROC RTUs reserved for domain 12 (0 MAX) [0]:
PROC RTUs reserved for domain 13 (0 MAX) [0]:
PROC RTUs reserved for domain 14 (0 MAX) [0]:
PROC RTUs reserved for domain 15 (0 MAX) [0]:
XSCF>
setcod 3
codd 15:51:36: COD PROC Headroom changed to 3
0 Successful completion.
>0 An error occurred.