Filter
Top Products
C156-E097-01EN 4 - 1
CHAPTER 4 INSTALLATION
4.1 Notes on Drive Handling
4.2 Connection Modes
4.3 Settings
4.4 Mounting
4.5 Cable Connections
4.6 Operation Confirmation and Preparation for Use after
Installation
4.7 Dismounting Drive
This chapter describes notes on handling the drives, connection modes, settings, mounting the drives,
cable connections, and operation confirmation and preparation for use after installation, and notes on
demounting the drives.
4.1 Notes on Drive Handling
(1) General notes
Note the following points to maintain drive performance and reliability:
1) Shock or vibration applied to the drive that exceeds the values defined in
the standard damage the drive. Use care when unpacking.
2) Do not leave the drive in dirty or contaminated environments.
3) Since static discharge may destroy the CMOS devices in the
drive, pay attention to the following points after unpacking:
• Use an antistatic mat and wrist strap when handling the drive.
• Hold the mounting frame when handling the drive. Do not
touch the PCA except when setting the switches.
4) When handling the drive, hold both sides of the mounting frame.
When touching other than both sides of the mounting frame, avoid
putting force.