Filter
Top Products
The Basics
67
Contents
Back
Next
Index
Charging Batteries
1 Plug the cable from the charger’s AC adapter
into the battery charger port.
2 Select the appropriate included international
power cord and plug the AC adapter into a
wall outlet.
3 Insert one or two batteries in the slots in the
battery charger. (Use either slot when
charging only one battery.)
On average, batteries are rapid-charged in
approximately 2 1/2 hours. If two batteries are
inserted, they are charged simultaneously.
The following table shows the battery charger
status as indicated by each state of the LEDs.
☛ When you insert a battery, there is a slight
delay before any LED turns on.