Filter
Top Products
Capturing and Processing Images
90
Contents
Back
Next
Index
MAMIYA 645 AFD and CONTAX 645: To
capture an image, half-press the Shutter Release
button for 1/5 second, then press the button fully
to the release position. If you hard-press the
button without the half-press, there will be a
significant delay between the hard-press and the
image capture.
MAMIYA 645 AF and CONTAX 645: The “Card
Full” message does not appear on the Image
LCD when the CF Card is full. If images are not
being captured, check the available space on the
Status screen (page 49).
DCS 645C: The viewfinder display on the
CONTAX 645 will not turn on if a DCS 645C is
attached and captured images cannot be stored.
If the viewfinder display will not turn on and you
cannot capture images to a CF card, check the
available space on the Status screen to be sure
the card is not full. If capturing images to a
computer, DCS Capture Studio or DCS Camera
Manager must be running.
Before You Begin