Capturing and Processing Images
94
Contents
Back
Next
Index
Setting ISO
The DCS 645 supports an ISO range of 100 to
400 at 1/3 stop intervals. The factory default is
ISO 100.
The ISO setting set the sensitivity of the imager’s
electronics to light. Increasing or decreasing the
ISO increases or decreases sensitivity.
1 Choose ISO from the Main menu.
2 Choose the desired setting from the ISO
menu.
The currently active ISO value is indicated by
a “•” symbol.
3 Press the OK button.
☛ The Hasselblad H1’s grip LCD will display
the current DCS 645H ISO setting if the
“Show ISO” option in the H1’s Custom
Settings menu is set to “Yes”.