Filter
Top Products
To print from a... Do this
sure your images and your HP iPod
meet the following requirements:
● The images you copy to the
HP iPod must be in JPEG format.
● Make sure the HP iPod is formatted
in Windows (FAT 32 file structure).
The HP iPod defaults to the
Windows file structure. To check if
your HP iPod was formatted for
Windows, go to Settings > About
on your HP iPod. If it was formatted
in Windows, it will display Format
Windows at the bottom of the
screen. If it was not formatted in
Windows, you must connect the
HP iPod to a Windows PC using the
USB cable that came with the
HP iPod and follow the onscreen
instructions.
Note HP iPods that have only
been connected to a Macintosh
are not compatible with the printer;
however, after connecting to a
Windows PC, Macintosh users can
still fully synchronize their
HP iPods back to Macintosh and
Mac iTunes and maintain printer
support.
To import photos to an HP iPod
1. Copy photos from a memory card to
your HP iPod using the Belkin
Media Reader for iPod.
2. Verify that photos are on your
HP iPod by selecting Photo Import
on the HP iPod menu. Photos
appear as Rolls.
To print photos from an HP iPod
1. Connect the HP iPod to the camera
port on the front of the printer using
the USB cable that came with the
HP iPod. The printer screen
displays Reading Device for up to
several minutes while the photos
Chapter 3
36 HP Photosmart 470 series