– The check marks verify that the print cartridge is installed correctly and
functioning properly.
– If an “x” appears to the left of any of the bars, align the print cartridge again.
If the “x” still appears, replace the print cartridge.
Storing the printer and print cartridges
Protect the printer and print cartridges by storing them properly when you are not
using them.
Storing the printer
The printer is built to withstand long or short periods of inactivity.
● Close the In and Out tray doors and push the printer screen down into the flat
position when the printer is not in use.
● Store the printer indoors out of direct sunlight in a place without temperature
extremes.
● If the printer and print cartridge have not been used for one month or more, clean
the print cartridge before printing. For more information, see Automatically
cleaning the print cartridge.
Storing the print cartridge
When you store or transport the printer, always leave the active print cartridge inside
the printer. The printer stores the print cartridge in a protective cap during the power-
down cycle.
Caution Make sure the printer completes its power-down cycle before you
unplug the power cord or remove the internal battery. This allows the printer to
store the print cartridge properly.
Follow these tips to help maintain HP print cartridges and ensure consistent print
quality:
● When you remove a print cartridge from the printer, store it in a print cartridge
protector to prevent the ink from drying out.
Chapter 5
46 HP Photosmart 470 series