HP (Hewlett-Packard) 630 Digital Camera User Manual


 
30 hp photosmart 630 series user’s manual
Using auto focus
The circle in the viewfinder and the two brackets in the middle
of the Live View screen show the focus region for the picture
you are taking. (See Using the viewfinder on page 28 and
Using live view on page 29.) When you press the Shutter
button halfway down, the camera uses this focus region to
automatically measure and then lock the focus.
The AF viewfinder light turns on solid green and the focus
brackets in the Live View screen turn green when the image is
in focus and the camera can lock the focus. However, the AF
viewfinder light blinks green and the focus brackets in Live
View turn red when the camera is unable to focus.
If the viewfinder light blinks and the focus brackets turn red,
release the Shutter button, re-frame the subject for your picture,
and then press the Shutter button halfway down again. If the
viewfinder light continues to blink and the focus brackets
continue to turn red after several tries, the lighting may be too
low, or there may not be enough contrast in the focus region.
Try using Focus Lock (see the next section).
NOTE When set to Macro Exposure Mode, the camera will
not take a picture if it cannot find focus.
3
or
—Battery level (actual icon shown
depends on the state of your camera batteries;
see Managing batteries on page 106)
—AC power when using the optional
HP AC power adapter or HP camera dock
4 Focus brackets (see the next section, Using auto
focus)
# Icon Description