Filter
Top Products
Chapter 4: Using hp instant share 63
Tagging images for hp instant share
destinations
NOTE You can tag each still image for any number of
HP Instant Share destinations. However, you cannot tag
video clips for any HP Instant Share destinations.
1 Turn on the camera, and then press the Share button.
2 Use the buttons to scroll to a still image for which you
want to select an HP Instant Share destination.
3 Use the buttons to scroll to the destination that you
want to select in the Share menu for this image, such as an
e-mail destination.
4 Press the OK button to select the destination, and a
appears over that destination in the Share menu. To un-
select the destination, press the OK button again.
5 Repeat steps 3 and 4 to select any other HP Instant Share
destinations for this image.
6 Scroll to other images by using the buttons, and repeat
steps 3 through 5 to select HP Instant Share destinations for
each of the other images. You can also use the buttons
to scroll to other images to review their destinations.
7 When you are finished selecting all of the HP Instant Share
destinations for your images, press the Share button
again to exit the Share menu.
8 Connect the camera to your computer and unload the
images as explained in Unloading to a computer on
page 67. Once the images are unloaded to your computer,
they will be automatically sent to their respective HP Instant
Share destinations.