Filter
Top Products
99
Troubleshooting and Support
PROCESSING... The camera is
processing data,
such as saving
the last picture
you took.
If you are in Live View,
wait a few seconds for the
camera to finish
processing before taking
another picture or pressing
another button.
CHARGING
FLASH...
The camera is
recharging the
flash.
It takes longer to charge
the flash when the battery
is low. If you see this
message a lot, you may
need to replace or
recharge the battery.
ERROR SAVING
IMAGE.
or
ERROR SAVING
VIDEO.
The optional
memory card that
is installed was
removed before
the camera
finished writing
to the card or
was half-locked.
• Always wait until the
Power/Memory light
stops blinking before
removing the memory
card from the camera.
• With the camera
turned off, remove the
memory card and
check to see if the
locking tab on the
edge of the card is fully
in the unlocked
position.
Message Possible Cause Solution