Filter
Top Products
135
Additional Information
Check disc. A disc unusable on this camcorder may have been
inserted or the disc may be damaged.
Make sure that the type of disc is correct, and that the
disc is not write-protected.
30, 105, 105
Check HDD. Check to see whether the HDD is write-protected.
Otherwise, the HDD may be destroyed.
105
Control Information
Error.
Scenes may have been edited on another device, etc.
Update the control information.
104
• Use another disc.
• See *3 and *4 on p.139.
—
Disc error has
occurred.
• Use another disc.
• See *3 and *4 on p.139.
—
• A mismatch in recording information may be caused
when editing is done on another device.
Format the disc or use another disc.
• Formatting the disc will erase all data on it.
104
Disc error has
occurred. Finalizing
is not complete.
• Disc error occurred during finalizing, and finalizing
failed. Replace the disc.
• See *3 on p.139.
113
Disc error has
occurred. Format the
disc now?
• Was the disc formatted on a PC, or formatting
interrupted?
Choose “YES” to format the disc. Formatting the disc
will erase all data on it.
• See *2 on p.139.
104
Disc error has
occurred. Formatting
is not complete.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc.,
before reusing it, or use another disc.
This message may also appear if you insert a disc for
which formatting was interrupted midway. In this case,
try formatting the disc or use another one.
104, 153
Disc error has
occurred. Keep Disc
inside & restart.
Disc error could have occurred during editing of scenes.
Turn off the camcorder with the disc being used in it,
connect AC adapter/charger, and then power the
camcorder again. Repair of scenes will be tried.
37
Disc error has
occurred. Turn the
power switch off
once and then set it
to “BD/DVD”.
This message appears if a disc error has occurred during
dubbing.
Leave the disc inserted and turn the power off. Connect
the AC adapter/charger to the camcorder and set the
power switch to “BD/DVD”. The video file will be
repaired.
24
Disc error has
occurred.
Unfinalizing is not
complete.
This message will appear when a disc error occurs during
the unfinalization process. Replace the disc.
114
Message Cause & Troubleshooting
Reference
page