Filter
Top Products
English
103
1<>23
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose
“Beep” on the “Initial
Setup” menu screen,
and then press the A
button.
2 Select “On” or “Off”, and then press the A
button.
3 Press the MENU button to end the setting.
Note:
The “Beep” setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
1 Press the MENU
button, use the f/
e/d/c/A
buttons to choose
“Power Save” on the
“Initial Setup” menu
screen, and then press
the A button.
2 Select “On” or “Off”, and then press the A
button.
3 Press the MENU button to end the setting.
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to “OFF”, and then set it to “O”,
“N” or “P”
• The Power Save setting will not appear in the on-
screen information display.
• The Power Save setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
Setting Content
On
Beep is heard when the power switch is changed over, the REC button is
pressed, etc.
Off
No beep is heard.
On
Off
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Record LED
Ini tial Setup
RA
M
RA
M
Setting Content
On
To engage power save. If the DVD video camera/recorder is left in the recording
pause status without being operated for 5 minutes, it will automatically turn off to
prevent the battery from discharging needlessly.
Off
To cancel power save.
On
Off
Power Save
Beep
Record LED
ENTER RETURN
Demo Mode
Reset
Language
Ini tial Setup
RA
M
RA
M