Filter
Top Products
108
English
QR34962
DIVIDING MOVIES (EDIT - DIVIDE)
You can divide a scene into two parts.
To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion.
You can also cut out a part of scene and use it in the play list.
1 Press the DISC NAVIGATION button.
2 Select the scene to be divided.
3 Press the MENU button.
4 Choose, “Scene”, “Edit”,
“Divide” and then press
the button.
5 The “Divide Scene”
screen will appear: If you
are sure you want to
divide the selected scene, press the button:
The selected scene will be played back.
If you want to change the scene to be divided,
you can change it on this screen.
The selected scene will be played back.
6 When you reach the point
where you want to divide
the scene, press the
SELECT button.
7 The screen for verifying
division will appear:
Choose “YES”, and then
press the button.
Choose “NO” to cancel
division.
After division, the “Divide Scene” screen will be
restored.
Repeat steps 5-7 to divide another scene.
8 Press the button to quit.
Note:
• IfyoupresstheMENUbuttonbeforepressingthe
button instep5,the submenuscreen willappear.(P.102)
• The status bar of scene being played back can be
switched off or on by pressing the DISPLAY button.
• Searchand frame advance areuseful when designating
division points.
• If aspecial effect has been added to the original scene,
the “IN”effectwill beadded to thefirst half of scene,and
the “OUT” effect, to the latter half.
• Thedivisionpointmaydriftbeforeorafterthedesignated
point by approximately 0.5 seconds.
• Since ascene witha skip set cannot beplayed back,no
division point can be specified: Release the skip for the
scene before dividing it.
• Ifthedivisionpoint isat astill, amessagewill appear,but
no division will be made.
• If the division point is at the start or end of a scene, a
message will appear, but no division will be made.
• A movie scene whose recording time is 0.5 seconds or
less cannot be divided.
• Iffree space available on disc isinsufficient, divisionwill
not be possible: Delete unnecessary scenes.
• Pressing the button on the screen for verification will
restore the thumbnail display screen.
Scene
RAM
ENTER RETURN
Delete
Edit
Copy
Select
Detai l
Thu
m
bnail
Skip
Fade
Combine
Divide
M
ove
ETC