Filter
Top Products
53
English
QR34962
Recording Stills
Note:
RecordingofstillimagesispossibleonDVD-RAMdiscand
card.
1 Turn the DVD camera/recorder on.
When using DVD-RAM disc:
Set the power switch to “ PHOTO”.
When using card:
Set the power switch to “ PHOTO”.
After the ACCESS indicator goes out, perform
the subsequent operation:
2 Check the subject on the screen (viewfinder or
LCD).
3 Press the REC button.
The DVD video camera/recorder automatically
focuses on the subject at the center of screen
(when auto focus is selected).
The screen will be black, and then the recorded
still will be displayed. When the “/” mark
appears, you can proceed with the next
recording; while “DISC ACCESS” or “CARD
ACCESS” is being displayed, you cannot
proceed with the next recording.
4 Set the power switch to “POWER OFF” to turn
the DVD video camera/recorder off.
Note:
• See“Stillrecordingquality”onpage 27fordetailsofstills
on card.
• Donotoperatethepowerswitchorremovethecardwhile
the ACCCSS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
• WithDZ-MV380A,therangeofscreeninwhichrecording
is possible will be different for movie and still.
ACCESS/PC
indicator
CARD
ACCESS
indicator
Power switch
8:00AM
9/30/2003
999
REM
Still recording mode
Number of recordable stills
(When usingDVD-RAM disc)
FINE
8:00AM
9/30/2003
999
REM
(When using card)