Filter
Top Products
84
English
QR34962
MAGNIFYING SUBJECT IMAGE (DIG. ZOOM)
When the zoom lever is moved down to “T” control side with Dig. Zoom 40× or 240× specified, digital
zoom will automatically kick in when optical 10× zoom range is exceeded. You can set the digital zoom
to 40× or 240× for movie recording, or 40× for still recording.
1 Press the MENU button,
choose “Dig. Zoom” on
the “Camera Functions
Setup” menu screen, and
then press the
button.
2 Choose the desired magnification, and then
press the button.
3 Press the MENU button to end the setting.
Moving the zoom lever will display the digital
zoom bar.
Dig. Zoom “240×”, “40×” or “Off” setting will be
stored in memory even if the DVD video camera/
recorder is turned off.
Note:
• You can check whether Dig. Zoom is “240×”, “40×” or
“Off” bypressing theDISPLAY button andreviewing the
on-screen information.
• You can also use the DIGITAL ZOOM button on remote
control to switch the digital zoom setting: Pressing the
button during movie recording will switch the setting
between “Off”, “40×” and “240×”: Pressing the button
during stillrecording willswitch between “Off” and “40×”.
• When using card, zooming only up to 40× is possible,
even when “240×” or “40×” has been chosen.
• Ifthepowerswitchissetto “ PHOTO”withDVD-RAM
disc loaded, zooming only up to 40x is possible, even
when “240×” has been chosen.
Ca
m
era Functions Setup
Progra
m
AE
W
hite Bal.
Dig.Z
oom
EIS
40x
240x
ENTER RETURN
RAM
Off
MIC.Fi lter
8:00AM
9/30/2003
3 0 MIN
0:00:00
REM
FINE
TW
W
W
T
T
When Dig. Zoom is "Off"
When Dig. Zoom is "On"(40x)
Digital zoom range
When Dig. Zoom is "On"(240x)
Digital zoom range
(only in movie recording)