Hitachi DZ-MV350A Camcorder User Manual


 
67
English
QR34962
Playing Back

IMMEDIATELY CHECKING RECORDED SCENE
You can check your recording immediately on the spot.
1 Press button in the recording pause status.
The DVD video camera/recorder will enter the
playback mode, and the scene you have
recorded last will be played back.
When playback is finished, the DVD video
camera/recorder will enter the pause status at
the last image on disc.
If the playback pause status continues for as long
as 5 minutes, the DVD video camera/recorder
will automatically return to the recording pause
status.
2 Press the button.
Playback will stop, and recording pause status
will be restored.
Note:
If the LCD monitor is open during playback of movie,
playbacksoundwillbeheardfromthespeaker.Adjustthe
sound volume using the volume control buttons (
, ).
To temporarily stop playback, press the button.
Press the
button again to restart playback.
Evenifyou stopplayback midway andimmediately start
recordingagain,thenewimagewillberecordedafterthe
lastsceneondiscorcard(thepreviousimageswillnotbe
overwritten).
Depending on the amount of data to be played back, it
may take some time for the playback image to appear.
Donotoperatethepowerswitchorremovethecardwhile
the ACCCSS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
Notes when playing back stills on card:
This DVD video camera/recorder can play back image
data recorded on SD memory card in other digital
camerasconformingtotheDCF(DesignruleforCamera
Filesystem) standard.Therangeofimagedatanormally
playable on thisDVD video camera/recorder isthat with
pixels from 80horizontal x60 vertical to 4000 horizontal
x3000 vertical.If thepixel datais outsidethisrange,blue
thumbnails will appear (thumbnails* in the figure),
meaning the image is unplayable.
Even when the number of pixels is within the above
range, playback may not be possible, depending on the
recording status of the digital cameras used.
When playing back a still, “Playback.” will appear: Stills
with a large number of pixels will take some time to
appear.