Filter
Top Products
122 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 12 - Side panel menu
user 2 Start play, Stop play,
Rewind, Forward, Pause
play, Record, Mark in,
Mark out, Ext iris,
Disabled
Assigns a function to user button 2. 0 Oper
lens
RET button Ext signal, Playback Assigns a function to the RET button on the
lens.
0 Oper
handgrip
zoom control Enabled, Disabled Enables or disables the zoom control on top of
the camera carrying handle (zoom control is
only available with digital lens interfaces.)
0 Oper
record switch Enabled, Disabled Enables or disables the record switch under
the carrying handle.
0 Oper
ports
digital out Normal, VF Selects the output signal for the digital output.
When VF is selected the output signal marker
(‘VF’) is shown on the text overlay.
1 -
analog in CVBS, Timecode,
AES Audio, Audiosync
Selects the signal for the analog BNC input
connector.
1-
analog out CVBS, Timecode,
AES Audio, Audiosync
Selects the signal for the analog BNC output
connector.
1 -
IEEE 1394 Off, Exclusive, Both Selects IEEE 1394 interface operation mode:
Exclusive = playback via IEEE 1394 only;
Off = no playback via IEEE 1394;
Both = normal playback and simultaneous
playback via IEEE 1394.
1-
genlock
lock source None, Digital, Analog Selects the type of source to which the
camera locks.
1-
date/time
time
HH 0..23 (12) Sets real time clock (hours). 2 -
MM 0..59 (00) Sets real time clock (minutes). 2 -
SS 0..59 (00) Sets real time clock (seconds). 2 -
date
MM 1..12 (1) Sets month. 2 -
DD 1..31 (1) Sets day of the month. 2 -
YY 0..98 (8) Sets year (last two digits). 2 -
time zone UTC-12:00 .. UTC+12:00
(UTC+00:00)
Selects the time zone in 0:30 hrs steps. 2 -
sidepanel
backlight 1..15 (15) Sets the brightness level of the backlight of
the side panel display.
0-
calibration execute Runs the touch screen calibration procedure. S1 -
Menu item Values Description Level File