Filter
Top Products
12 EN
Getting Started
MAX TIME
115min
LEVEL
0
50
100%
BATTERY CONDITION
LANGUAGE
ENGLISH
1 Select
2 SET
CLOCK ADJ.
MONTH. DATE. YEAR
12
h
2
:
10
AM
JAN.
3
.
2007
1 Select
2 SET
Data Battery System
You can check the remaining battery power
and the recordable time.
11
Set the Power Switch to “REC” or “PLAY”
(੬ 9).
22
Press DATA, and the battery status screen
appears.
• Press DATA again to return to the normal
screen.
• Data battery status cannot be displayed
during playback or while recording is in
progress.
• If “COMMUNICATION ERROR” appears
instead of the battery status even though
you tried to press DATA several times, there
may be a problem with your battery. In such
a case, consult your nearest JVC dealer.
Using AC Power
Perform step
44
in “Charging The Battery Pack”
(੬ 11).
Language Settings
The language on the display can be changed
(੬ 22).
11
Set the Power Switch to “REC” or “PLAY”
(੬ 9).
• If set to “REC”, the recording mode should
be set to “ M” (੬ 9).
2
Press MENU.
3
Select “SYSTEM”, press SET or .
4
Select “LANGUAGE”, press SET or .
55
Select the desired language, press SET or
.
66
Press MENU.
Press whenever you want to return to the
previous menu screen.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
(੬ 21, 23).
Perform steps
1
–
22
in “Language Settings”
(੬ 12).
1
Select “DISPLAY”, press SET or .
2
Select “CLOCK ADJ.”, press SET or .
33
Select the desired date display format,
press SET or .
• Repeat this step to input time display
format (Select from “24h” or “12h”), month,
date, year, hour and minutes.
44
Press MENU.
Press whenever you want to return to the
previous menu screen/setting.
2
3
4
Date/Time Settings
1
2
GR-DA30US_EN.indb 12GR-DA30US_EN.indb 12 7/11/2007 6:00:23 PM7/11/2007 6:00:23 PM