Filter
Top Products
30 EN
Editing
Connection To A Personal
Computer
When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.
• Connect the DV cable fi rst to the PC, and
then to the camcorder.
• Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
It is also possible to transfer moving
images to a PC with a DV connector by
using the software equipped with the PC or
commercially available software.If you are
using a Windows
®
XP, you can use Windows
®
Messenger to conduct video conferences over
the Internet, using a camcorder. For details,
refer to the help for the Windows
®
Messenger.
Notes:
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack (੬ 11).
• When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.
• The date/time information cannot be captured
into the PC.
• Refer to the instruction manuals of the PC and
Software.
• The system may not work properly depending
on the PC or capture board you are using.
• If, after connecting a DV cable to the
camcorder and it doesn’t work, restart the
camcorder.
• Microsoft
®
and Windows
®
are either registered
trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
To DV IN/OUT
Core fi lter
Core fi lter
DV cable
(optional)
or
PC with DV connector
To DV
Connector
GR-DA30US_EN.indb 30GR-DA30US_EN.indb 30 7/11/2007 6:00:35 PM7/11/2007 6:00:35 PM