EN 21
Menus for detailed adjustment
ENGLISH
Menus Settings: [ ] = Factory-preset
TAPE
REC MODE
[SP]*: To record in the SP (Standard Play) mode
LP: Long Play—more economical, providing 1.5 times the
recording time.
*SP indicator does not appear on the screen.
Notes:
• If the recording mode is switched, the playback picture will be blurred at
the switching point.
• During playback of a tape recorded on another camcorder, blocks of
noise may appear or there may be momentary pauses in the sound.
SOUND MODE
[12BIT]: Enables video recording of stereo sound on four separate
channels. (Equivalent to the 32 kHz mode of previous
models).
16BIT: Enables video recording of stereo sound on two separate
channels. (Equivalent to the 48 kHz mode of previous
models).
The “DISPLAY” settings (except “CLOCK ADJ.”, “16:9 OUTPUT” and “BRIGHT”) are effective
only for shooting.
Menus Settings: [ ] = Factory-preset
DISPLAY
ON SCREEN
LCD: Keeps the camcorder’s display (except the date, time and
time code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when
the camcorder is connected to a TV.
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
CLOCK ADJ.
੬ 12, “Date/Time Settings”.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the
connected TV. Frame numbers are not displayed during
recording. (੬ 15)
16:9 OUTPUT
To enable your tv to display images in 16:9 wide mode, set the tv
screen size correctly.
[4:3 TV]: For TV with an aspect ratio of 4:3.
16:9 TV: For TV with an aspect ratio of 16:9.
BRIGHT
੬ 13, “Brightness Adjustment Of The Display”.
GR-DA30US_EN.indb 21GR-DA30US_EN.indb 21 7/11/2007 6:00:30 PM7/11/2007 6:00:30 PM