26 EN
Features for recording
3
4
Manual White Balance
Adjustment
Adjust the white balance manually when
shooting under various types of lighting.
White paper
1
Set the Power Switch to “REC” (੬ 9).
2
Set the recording mode to “M” (੬ 9).
33
Hold a sheet of plain white paper in front
of the subject. Adjust zoom or position
yourself so that the white paper fi lls the
screen.
44
Select “MWB” in “W. BALANCE” menu
(੬ 20), then press and hold SET or until
begins blinking.
• When the setting is completed, stops
blinking.
5
Press SET or to engage the setting.
66
Press MENU. The Menu Screen closes
and the Manual White Balance indicator
is displayed.
Notes:
• In step
33
, it may be diffi cult to focus on the
white paper. In such a case, adjust focus
manually (੬ 24).
• Because the color temperature is different
depending on the light source, use this function
for a more natural result.
• Once you adjust white balance manually, the
setting is retained even if the power is turned
off or the battery removed.
• White Balance cannot be activated
simultaneously with “TWILIGHT” in
“PROGRAM AE” (੬ 27).
• White Balance cannot be activated if the
“SEPIA” or “MONOTONE” mode is activated.
White Balance Adjustment
The white balance refers to the correctness of
color reproduction under various lighting. If the
white balance is correct, all other colors will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional
color/tint reproduction.
1
Set the Power Switch to “REC” (੬ 9).
2
Set the recording mode to “M” (੬ 9).
33
Set “W. BALANCE” to the desired mode
(੬ 20).
• The selected mode indicator except
“AUTO” appears.
W. BALANCE
[AUTO]:
White balance is adjusted automatically.
MWB :
Adjust the white balance manually when
shooting under various types of lighting.
(੬ 26, “Manual White Balance Adjustment”)
FINE :
Outdoors on a sunny day.
CLOUD :
Outdoors on a cloudy day.
HALOGEN :
A video light or similar type of lighting is used.
[ ] = Factory-preset
GR-DA30US_EN.indb 26GR-DA30US_EN.indb 26 7/11/2007 6:00:32 PM7/11/2007 6:00:32 PM