Filter
Top Products
4
Thank you for purchasing the DV Camcorder GY-DV550.
These instructions are for GY-DV550U.
This unit is a MiniDV video system format camcorder.
Videocassettes which are not marked with the MiniDV
symbol cannot be used with this unit.
MAIN FEATURES
The following phenomena may occur when tapes recorded
on other units (including another GY-DV550) are recorded
or played back on this camcorder.
●
The transient section between scenes recorded on other
units and those recorded on this unit may appear
disturbed.
●
Digital noise may appear during playback due to tracking
errors.
●
Compact, lightweight design
Compact and light weight body was realized by use of mag-
nesium die cast.
●
DV high-quality digital format
The 4:1:1 (U MODEL)/4:2:0 (E MODEL), 8-bit, 25 Mbps com-
ponent digital processing of the format ensures recording
and playback with high picture quality.
●
High sound quality thanks to PCM audio
Two types of sampling, 16-bit, 48 kHz sampling and 12-bit,
32 kHz sampling, ensure high-quality digital audio.
●
26-pin camera terminal
The terminal can be used to connect an external VCR and
camera remote control unit. The recording VCR can be se-
lected in the VTR SELECT switch.
(Main unit/parallel/external VCR)
●
External video input capability
External composite video can be recorded with this unit.
●
Character mixing capability for monitor output
Characters can be mixed for output to the MONITOR OUT
connector using menu setting.
●
Audio reference recording level selected
The audio reference recording level can be set to -20dB or
-12dB in the menu.
●
Normal/LETTER (16:9) screen switching capability
You can switch between 4:3 ratio screen and 16:9 ratio screen
in the menu.
●
Concentrated LCD display (back-lit)
The concentrated LCD panel shows the time code and CTL
counter, tape remaining time, remaining battery power, au-
dio levels, VCR section setup menus, hour meter data, and
a variety of warning indications. The display is back-lit to fa-
cilitate viewing in dark locations.
●
Time code reader/generator
The built-in time code reader/generator can be used to record
SMPTE (U MODEL)/EBU (E MODEL) time code and user's
bits.
●
Time code input/output connectors for slave lock capability
This unit can be slave-locked to an external time code gen-
erator which is connected to the time code input.
The data in the built-in time code generator is output from
the time code output terminal.
●
Built-in monitor loudspeaker for audio checking
The input audio can be monitored in recording or EE mode.
The playback sound can be monitored in the playback mode.
The loudspeaker also outputs an alarm tone in case an ab-
normal condition occurs in the unit.
●
Rec check function for convenient recording review
●
Camera section designed with 3-CCD system for high-qual-
ity picture
Three 1/2" CCDs with 380,000 effective pixels employed.
Digital signal processing for reproduction of high-quality pic-
ture.
●
Super sensitivity F/11, 2000 lux
Enables shooting at normal indoor illumination eliminating
the need for extra illumination.
●
LOLUX for 0.75 lux (F1.4) illumination
Employment of LOLUX mode ensures +33 dB gain. This is
ideal for difficult shooting conditions with almost no illumina-
tion.
●
Multi-Zone Auto Iris Detection Circuit
Multi-zone auto iris detection circuit ensures optimum iris posi-
tion even in backlit conditions or when a bright subject moves in
a frame. Switch provided for selecting over or under level.
●
Safety Zone indication in viewfinder
Two types of safety zone indicator functions provided.
Center mark can be turned ON/OFF.
●
Zebra pattern video level indication in viewfinder
Select video level indicated by zebra pattern by means of
menu setting.
●
Full Auto Shooting (FAS) function
Eliminating the need for troublesome switch or filter opera-
tions, the FAS function automatically provides a wide range
of compatibility with shooting conditions which varies as you
move between indoors and outdoors or between bright and
dark locations.
●
Color temperature conversion filters for "3200K", "5600K +
1/8ND", "5600 K + 1/64ND" provided.
●
Variable scan shutter
Eliminates flicker when shooting other screen pictures than
NTSC, such as computer monitor screens.
Copes with the range from 60.1 Hz to 2084.6 Hz.
●
DV (i. LINK) connector
DV connector (4-pin) provided. Enables transfer of digital data
to other equipment provided with DV connector, such as a
non-linear editing controller.
●
S.S.F. (Super Scene Finder) function
Enables memorization of the start point and ending point of
each scene or memorization of CUE points.
●
Camera (Video) output, VCR playback output (composite/
YC) possible
●
GENLOCK input connector
●
Equipped with remote control system compatible GENLOCK
function with SC (Sub Carrier) lock.
●
Built-in color bar (SMPTE type) (U MODEL)
Built-in colour bar (EBU type) (E MODEL)
●
Superior operability with shutter speed and menus selected
by dial.
●
This unit records and plays back in the SP mode.
Recording or playback in the LP mode is not possible.
●
Due to manufacturing dispersion of tapes, we
recommend not to record pictures within the first 2 to 3
minutes from the beginning of the tape.
●
Before recording important scenes, be sure to perform a
test recording and confirm that both video and audio are
recorded correctly.
●
Recorded video and audio contents are for private use.
Other use may infringe on the rights of copyright holders.
●
JVC cannot assume liabilities that may derive from the
impossibility of normal recording or playback of video or
audio due to malfunction of the camcorder or the
videocassette.
3
SAFETY PRECAUTIONS
FOR USA AND CANADA
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product's enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.
INFORMATION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmfull interfrence to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
CAUTION
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC
COULD VOID USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
INFORMATION FOR USA
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la Class B est conforme à la norme
NMB-003 du Canada.
CAUTION
NOTE:
The rating plate (serial number plate) is on the top frame.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
This unit should be used with 12V DC only.
CAUTION:
To prevent electric shocks and fire hazards, do NOT use
any other power source.
CAUTION
To prevent electric shock, do not open the cabinet. No user servicea-
ble parts inside. Refer servicing to qualified service personnel.
AVERTISSEMENT :
POUR EVITER LES RISQUES D’INCENDIE OU
D’ELECTROCUTION, NE PAS EXPOSER
L’APPAREIL A L’HUMIDITE OU A LA PLUIE.
Ce magnétoscope ne doit
être utilisé que sur du courant
direct en 12V.
ATTENTION :
Afin d’eviter tout resque d’incendie ou d’électr
ocution,
ne pas utillser d
’autres sour
ces d’alimentation électrique
.
REMARQUE :
La plaque d’identification (numéro de série) se trouve sur le panneau
arrière de l’appareil.
WARNING ON LITHIUM BATTERY
The battery used in this device may present a fire or chemical burn
hazard if mistreated. Do not recharge, disassemble, heat avobe 100°C
(212°F) or incinerate.
Replace battery with Matsushita Electric CR2032, use of another
battery may present a risk of fire or explosion.
• Dispose of used battery promptly.
• Keep away from children.
• Do not disassemble and do not dispose of in fire.
3U
U