Filter
Top Products
12. SETUP MENU
84
OFF
BARS+CAM
DATE&TIME
MM/DD/YY (U)
DD/MM/YY (E)
24 HOUR
OFF
–
Item Function, Operation Variation Range Initial Setting
DISPLAY
DISPLAY
MODE
DISP STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
PAGE BACK
For setting whether to display the time and date on the viewfinder.
OFF : Time and date are not displayed.
ON : Time and date are displayed.
When setting to ON, the time and date are recorded on the upper of left of
the video.
For selecting the mode for displaying the time and date on the viewfinder.
BARS+CAM
: Time and date are displayed when outputting color bar signals
or camera images.
BAR : Time and date are displayed when outputting color bar
signals.
CAM : Time and date are displayed when outputting camera signals.
“- - -” is displayed when DISPLAY is set to OFF, and the setting will be
unavailable.
For selecting the format of the time and date display.
DATE&TIME : The time and date are displayed.
DATE : The date is displayed.
TIME : The time is displayed.
“- - -” is displayed when DISPLAY is set to OFF, and the setting will be
unavailable.
For selecting the format of the date display.
YY/MM/DD: Displays in the format of year/month/date.
MM/DD/YY: Displays in the format of month/date/year.
DD/MM/YY: Displays in the format of date/month/year.
“- - -” is displayed when DISPLAY is set to OFF, and the setting will be
unavailable.
For selecting the format of the time display.
24 HOUR : Displays the time using the 24 hour system.
12 HOUR : Displays the time using the 12 hour system.
“- - -” is displayed when DISPLAY is set to OFF, and the setting will be
unavailable.
For selecting whether to display the seconds in the time display.
OFF : Seconds are not displayed.
ON : Seconds are displayed.
“- - -” is displayed when DISPLAY is set to OFF, and the setting will be
unavailable.
When the cursor is at this position, pressing the SHUTTER dial once will
return the unit to the CAMERA MENU screen.
OFF
ON
BARS+CAM
BAR
CAM
DATE&TIME
DATE
TIME
YY/MM/DD
MM/DD/YY
DD/MM/YY
24 HOUR
12 HOUR
OFF
ON
–
12-11 TIME DATE screen
12. SETUP MENU
83
128
0
128
–
12-10 SETUP Screen
Item Function, Operation Variation Range Initial Setting
H PHASE
SC COARSE
SC FINE
PAGE BACK
For adjusting the horizontal phase of the unit in relation to the signal
(external sync signal) input through the GENLOCK/AUX IN connector on
the left side of the unit.
Delaying the horizontal phase of the unit in relation to the external sync
signal .
...................Increase the number
Speeding up the horizontal phase of the unit in relation to the external
sync signal .
................... Decrease the number
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by- - -.
For roughly adjusting the unit
’
s sub-carrier (SC) phase against signals
(external synchronous signals) inputted to the GENLOCK/AUX IN terminal
on the left side of the unit.
(0°, 90°, 180°, 270°)
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by- - -.
For fine adjusting the sub-carrier (SC) of the unit in relation to the signal
(external sync signal) input through the GENLOCK/AUX IN connector on
the left side of the unit.
Rotating the sub-carrier clockwise in relation to the external sync signal
...................Increase the number
Rotating the sub-carrier anticlockwise in relation to the external sync signal
...................Decrease the number
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by - - -.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
0
to
255
0
90
180
270
0
to
255
–
26 PIN OUT
CHARACTER
MIX
Other than composite signals, another type of video signals can be
outputted from the VTR/RM multi-pin connector. The other output video
signal is selected here.
Y/C :Outputs Y/C separate signals.
RGB :Outputs RGB signals.
CPN :Outputs component video signals.
For selecting whether to mix characters in the MONITOR OUT video.
OFF : No characters are displayed
ON : Character-mixed display
Y/C
RGB
CPN
OFF
ON
CPN
OFF
SET UP
(U MODEL)
For selecting whether to include setup signals in the camera images,
external input video or VCR playback video signals.
OFF : Setup signals are not included.
ON : Setup signals are included. (Setup level: 7.5%)
OFF
ON
ON