Filter
Top Products
12. SETUP MENU
80
MASTER
BLACK
DETAIL
DTL. V/H
BAL
DTL.
FREQUENCY
SKIN DTL
DETECT
V.
RESOLUTION
KNEE
POINT
ADVANCED
PROCESS
PAGE BACK
NORMAL
NORMAL
NORMAL
LOW
OFF
NORMAL
100%
–
12-6 PROCESS Screen
Item Function, Operation Variation Range Initial Setting
Adjusts the pedestal level (master black), which is the reference of black.
• To increase the pedestal level...... Increase the number. (UP)
• To decrease the pedestal level ....Decrease the number. (DOWN)
Adjusts the detail enhancement level.
• To sharpen details ....................... Increase the number. (UP)
• To soften details........................... Decrease the number. (DOWN)
Sets the direction, horizontal (H) or vertical (V), in which stronger detail
enhancement is applied.
To strengthen the H enhancement .....Increase the number (UP).
To strengthen the V enhancement ... ..Decrease the number (DOWN).
While the LOLUX function is operating, the setting value is fixed at
NORMAL and “FIX” is displayed.
Varies the detail enhancement level by changing the detail enhancement
frequency. Set in accordance with the subject
HIGH............. Applies strong detail enhancement.
Used to shoot subjects with fine patterns.
MIDDLE ........ Applies medium detail enhancement.
LOW.............. Applies weak detail enhancement.
Used to shoot subjects with large patterns.
While the LOLUX function is operating, the setting value is fixed at
MIDDLE and “FIX” is displayed.
Sets the Skin Detail function to ON or OFF.
ON ................ Skin Detail function activated.
OFF............... Skin Detail function not activated.
☞ See "Using the Skin Detail Function" on page 91.
Increases the vertical resolution.
• NORMAL .... Vertical resolution 380 lines.
• V.MAX ......... Vertical resolution 450 lines
(The sensitivity is degraded and the bright sections may be colored
depending on the subject.)
Sets the knee point (brightness level) when the AUTO KNEE function is
set to OFF.
Displays the ADVANCED PROCESS Screen.
☞ See "ADVANCED PROCESS Screen" on page 81.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
MAX (100)
99 201
gradations
to
NORMAL (0)
to
-99
MIN (-100)
MAX (7)
615
gradations
to
NORMAL (0)
to
-6
MIN (-7)
H-MAX (4)
39
gradations
to
NORMAL (0)
to
-3
H-MIN (-4)
HIGH
MIDDLE
LOW
ON
OFF
NORMAL
V.MAX
80%
85%
90%
95%
100%
–
Note:
Note:
12. SETUP MENU
79
The SHUTTER button on the right side section is used to select STEP for
fixed shutter speed or V.SCAN variable scanning rate for shooting computer
monitor screens.
STEP .............. Enables setting of different fixed shutter speeds. [1/100,
1/250, 1/500, 1/1000, 1/2000] (U MODEL)
[1/120, 1/250, 1/500, 1/1000,1/2000] (E MODEL)
VARIABLE....... Selected when shooting computer monitor screens, etc.
[Variable range: 60.1 to 2084.6 Hz] (U MODEL)
[Variable range: 50.1 to 2067.8 Hz] (E MODEL)
Selects the W.BAL switch (
@
on page 13) position to which the FAW (Full-
Time Auto White Balance Adjustment) function is to be assigned.
NONE ............. FAW function is not used.
A ..................... FAW is assigned to the A position.
B ..................... FAW is assigned to the B position.
PRESET ......... FAW is assigned to the PRESET position.
Selects the gain value in each position of the GAIN switch (9 on page
13).
Smoothens the transition when the GAIN switch (
9
on page 13), or
WHT.BAL switch (
@
on page 13) is switched over and achieves gradual
change in place of sudden change.
However, the smooth transition function does not function when switching
the GAIN switch set in ALC, FAS button and the LOLUX button.
ON .................. Activates the smooth transition function.
OFF................. Deactivates the smooth transition function.
Sets the level of auto iris when setting the AUTO IRIS switch to BACK L or
SPOT L.
LOW :Lowers the iris level.
MIDDLE :Opens/Closes the iris by 1 step from the standard state.
HIGH :Raises the iris level.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
12-5 OPERATION Screen
Item Function, Operation Variation Range Initial Setting
SHUTTER
FAW
GAIN L
GAIN M
GAIN H
SMOOTH
TRANS
SPOT L/
BACK L
PAGE BACK
STEP
VARIABLE
NONE
A
B
PRESET
–3dB
0dB
3dB
6dB
9dB
12dB
18dB
ALC
ON
OFF
LOW
MIDDLE
HIGH
–
STEP
NONE
L: 0dB
M: 9dB
H: 18dB
OFF
MIDDLE
–
ASPECT RATIO
LETTER
4:3
4:3Sets the image size of the video signal.
LETTER ......LETTER BOX (16:9 aspect ratio) image output.
4:3............... 4:3 aspect ratio image output.
When setting ASPECT RATIO to LETTER, 16:9 screen detection ID
signal will not be outputted from the Y/C OUT connector.
Note: