Filter
Top Products
12. SETUP MENU
78
12-4 VF Display Screen
Item Function, Operation Variation Range Initial Setting
F.NO/FILTER
AUDIO
DISPLAY
SAFETY ZONE
CENTER
MARK
REC TIME
ZEBRA
PAGE BACK
Sets whether to display the F-number of the lens iris or filter position of
the unit on status screen 1.
F. NO ..................... F-number is displayed.
FILTER.................. Filter position is displayed.
OFF....................... No display
Selects whether or not the audio indicator is displayed on the Status 1
screen.
ON ........................ Audio indicator is displayed.
OFF....................... Audio indicator is not displayed.
Selects the safety zone setting.
Selects whether or not a center mark is shown during display of safety
zone.
ON ........................ Center mark displayed.
OFF....................... Center mark not displayed.
When the SAFETY ZONE item is set to OFF, "---" is displayed and this
item cannot be set.
Sets whether the remaining tape recording time or TIME CODE is
displayed on the Status 1 screen.
TC ......................... TIME CODE is displayed.
*The time code is displayed even if the VCR Setup
Menu item No. 516 DISPLAY SELECT is set to
“CLOCK”.
REMAIN................ Remaining time is displayed.
Switches the luminance level of the subject sections where the zebra
pattern is displayed.
Zebra patterns also displayed when color bar is displayed.
70-80% ................. Zebra pattern is displayed in sections with luminance
levels between 70% and 80%.
85-95% ................. Zebra pattern is displayed in sections with luminance
levels between 85% and 90%.
OVER 95%............ Zebra pattern is displayed in sections with luminance
levels over 95%.
OVER 100%.......... Zebra pattern is displayed in sections with luminance
levels over 100%.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
F.NO
FILTER
OFF
ON
OFF
OFF
NORMAL
16:9
ON
OFF
TC
REMAIN
70-80%
85-95%
OVER95%
OVER100%
–
OFF
OFF
OFF
ON
REMAIN
70-80%
–
☞ See "Safety Zone" on page 31.
12. SETUP MENU
77
SHUTTER
STATUS
MENU
FILTER
3200k
1
5600k+1/8ND
2
5600k+1/64ND
3
ALARM
MONITOR
OPERATE
NG
G
A
IN
O
U
T
PU
T
W
H
T.B
AL
V
TR
ON OFF
AUTO IRIS
LOLUX
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
LIGHT
ON
OFF
COUNTER
AUDIO SELECT
MANUAL
AUTO
CH-1 CH-2 CH-1 CH-2
REAR
FRONT
RM
AUDIO INPUT
MODE
CTL
TC
UB
CH-1
MIX
CH-2
RESET
OPERATE/WARNING
MONITOR
SELECT
CH-1
AUDIO
LEVEL
CH-2
VTR
ON
OFF
INCOM
MIC
INCOM
MIC
LEVEL
POWER
OFFRM
DC IN
/BATT.
CALL
CARBON
DYNAMIC
FULL AUTOBLACK
SHUTTER dial
STATUS button
2. 3. 4. 5. 6. 8.
1.
Press the STATUS button for 1 second to display the
CAMERA MENU screen in the viewfinder.
2.
Choose the file with the camera menu settings to be used.
(SCENE FILE A, B or OFF)
1 Turn the SHUTTER dial up or down to align the cursor
with SCENE FILE, and then press the SHUTTER dial
in the direction of the arrow.
• The area with the setting value starts blinking, and the
value can now be changed.
2 Turn the SHUTTER dial up or down to select the setting
value. (A, B or OFF)
3 Press the SHUTTER dial in the direction of the arrow.
• The setting value stops blinking but remains lit.
3.
Turn the SHUTTER dial up or down to align the cursor with
the menu item to be set, and then press the SHUTTER dial
in the direction of the arrow.
• The selected menu screen appears in the viewfinder.
4.
Choose the menu item from the menu screen.
Turn the SHUTTER dial up or down to align the cursor with
the menu item to be set, and then press the SHUTTER dial
in the direction of the arrow.
• The area with the setting value starts blinking, and the
value can now be changed.
5.
Change the setting value.
Turn the SHUTTER dial up or down to change the setting
value, and then press the SHUTTER dial in the direction of
the arrow.
• The setting value stops blinking but remains lit.
Ⅲ To change multiple items, repeat steps
4.
and
5.
above.
6.
Return to the CAMERA MENU screen.
Turn the SHUTTER dial up or down to align the cursor with
the PAGE BACK item, and then press the SHUTTER dial in
the direction of the arrow.
Ⅲ To change the settings of other menu screens, perform
the operations described in steps
3.
to
6.
above.
7.
If SCENE FILE A or B is selected, choose the FILE
MANAGE item from the CAMERA MENU screen and
perform the operations for storing a file.
☞ See "FILE MANAGE Screen" on page 82.
* It is not necessary to perform the file storage operations
for changes made to the SETUP MENU.
8.
Complete the CAMERA MENU setting.
Turn the SHUTTER dial up or down to align the cursor with
the EXIT item on the CAMERA MENU screen, and then
press the SHUTTER dial in the direction of the arrow.
• The normal screen returns in the viewfinder.
--- - - CAMERA MENU -
SCEN FI LE : A
VF DISPLAY MENU
OPERAT ION MENU
PROCESS MENU
FILE STORE
SETUP MENU
..
..
..
..
..
TIME DATE..
EXIT
E
CURSOR Item Setting value
CAMERA MENU screen
12-3 How to Select from the Camera Menu
SHUTTER
MENU
--- VF DISPLAY ---
SCENE F I LE A
F.NO/FILTER
DISPLAY
:F.NO
:ON
:NORMAL
AUDIO
SAFTY ZONE
CENTER MARK :ON
-80%
:REMAIN
:70
REC T IME
ZEBRA
PAGE BACK
Item Setting value
VF DISPLAY MENU screen