Filter
Top Products
Adjusting the Grip Belt
Open the pad and adjust the position of the grip belt accordingly.
.
A
UDIO I
MIC
N
OPE
N
Caution :
0
If the grip belt is loose, this unit may drop and result in injuries or
damages.
0
Parents should take extra care when your child is using the
camera recorder.
Setting up the Remote Control
The functions of the camera recorder can be configured using a
wired remote control.
1
Connect a wired remote control to the camera
recorder.
Connect the wired remote control (sold separately) to the
[REMOTE] terminal of this camera recorder.
.
Connect the wired remote control
[REMOTE] Terminal
2
Turn on the power of the camera recorder.
Caution :
0
Turn off the power of the camera recorder when connecting a
wired remote control.
Attaching the Tripod
To prevent the camera recorder from falling off, which may result in
injuries or damages, read the instruction manual of the tripod to be
used and make sure that it is securely attached.
To attach a tripod to this unit, use the “tripod mounting holes
(bottom)”.
“Tripod mounting holes” (A p. 16)
.
Caution :
0
Use the tripod on a stable surface.
Removing the Hood
Remove the hood when attaching a filter (with external diameter 50
mm and below), teleconverter or wide converter to the front of the
lens.
0
Turn the hood in an anti-clockwise direction to remove it.
.
Hood
0
To attach a hood, press it against the lens, and turn it in the
clockwise direction.
Opening the Lens Cover
Use the lens cover switch to open or close the lens cover.
Before shooting, open the lens cover.
.
Lens cover switch
Memo :
0
When this camera recorder is not in use, close the lens cover to
protect the lens.
0
Do not press against the lens cover with force. Doing so may
damage the lens or the cover.
Preparations
23