JVC GY-HMQ10U Camcorder User Manual


 
Error Displays and Actions
Error Message Action
FORMAT ERROR!
0
Check the operating procedure, and perform once again.
“Formatting (Initializing) SDHC/SDXC Cards” (A p. 30)
0
Turn off and on this unit again.
MEMORY CARD
ERROR!
0
Check that the card is supported by this unit.
“SDHC/SDXC Cards” (A p. 11)
0
Turn off and on this unit again.
0
Remove and re-insert the SD card.
0
Remove any dirt from the SD card terminals.
0
If the above does not solve the problem, back up your files and execute “FORMAT SD CARD” in the
recording menu. (All data will be deleted.)
“Formatting (Initializing) SDHC/SDXC Cards” (A p. 30)
NOT FORMATTED
0
Select “YES”, then select “YES” on the “DO YOU WANT TO FORMAT?” screen.
RECORDING FAILURE
0
Turn off and on this unit again.
UNSUPPORTED
SCENE!
0
Use files recorded with this unit.
(Files recorded using other devices may not be playable.)
UNSUPPORTED FILE!
0
Use files recorded with this unit.
(Files recorded using other devices may not be playable.)
THIS FILE IS
PROTECTED
0
Cancel protection using “PROTECT/CANCEL” in the common menu.
“Protecting Files” (A p. 55)
CHECK CARD'S WRITE
PROTECTION SWITCH
0
Set the write protect switch of the SD card to off.
INSUFFICIENT
AVAILABLE SPACE
0
Delete files, or move files to a PC or other devices.
0
Replace the SD card with a new one.
SCENE QUANTITY
EXCEEDED LIMIT
0
Move the files or folders to a computer or other device.
(Back up your files.)
0
Select “FILE + MANAGEMENT NO” in “FORMAT SD CARD” of the common menu.
(All data on the SD card will be deleted.)
NUMBER OF FOLDERS
OVERFLOW
0
Move the files or folders to a computer or other device.
(Back up your files.)
0
Select “FILE + MANAGEMENT NO” in “FORMAT SD CARD” of the common menu.
(All data on the SD card will be deleted.)
FILE QUANTITY LIMIT
EXCEEDED
0
Move the files or folders to a computer or other device.
(Back up your files.)
0
Select “FILE + MANAGEMENT NO” in “FORMAT SD CARD” of the common menu.
(All data on the SD card will be deleted.)
THIS CARD CANNOT
BE USED FOR
RECORDING OR
EDITING ON THIS
CAMERA
The frame rate of this unit is different from the frame rate recorded on the card.
Change the frame rate in “SYSTEM SELECT” of the recording menu.
THIS CARD CANNOT
BE USED FOR
RECORDING ON THIS
CAMERA
The number of MP4 files on each card is different in the 4K2K mode.
Use a computer to adjust the files on the four cards to a consistent number.
Further Information
65