Filter
Top Products
o
Adjusting the audio recording level
Select a method for adjusting the audio recording level.
0
Set the [CH1/CH2 AUDIO SELECT] switch.
0
Select whether to set each channel to the [AUTO] or [MANUAL]
mode.
AUTO:
Use this setting to enable the auto adjustment mode.
MANUAL:
Use this setting to enable the manual adjustment mode.
Adjust the audio recording level using the [CH1/CH2] recording
level adjustment knob.
.
CH-2 INPUT
CH-1
3
4
5
2
1
2
3
0
CH-2
AUDIO INPUT
AUTO MANUAL
AUTO MANUAL
FULL AUTO
DOOR LOCK
A E
SET
GAIN
ADJ.
IRISWHT. BAL
SHUTTER
A F
M F
AUDIO
SELECT
INPUT1
INPUT2
- LINE -
- MIC -
MIC+48V
INPUT1
INPUT2
L-
M-
H-
B -
A -
PRST
CH-2 INPUT
CH-1
3
4
5
2
1
2
3
0
CH-2
AUDIO INPUT
AUTO MANUAL
AUTO MANUAL
AUD IO
SELECT
INPUT1
INPUT2
- LINE -
- MIC -
MIC+48V
INPUT1
INPUT2
[CH1/CH2 AUDIO SELECT ] Switch
[CH-2 INPUT ]
Switch
[CH1/CH2] recording level adjustment knob
[AUDIO INPUT 1/2 ] Switch
Reducing Wind Noise
Wind noise for each microphone can be reduced.
o
Menu setting
Set each of the items on “WIND CUT” in the recording menu to “ON”.
“WIND CUT” (A p. 62)
Monitoring Audio Sound Using a
Headphone
Applicable to: Camera mode and Media mode
1
Connect the headphone.
0
Connect the headphone to the headphone jack.
.
Headphone jack
2
Set the headphone sound to mixed sound or
stereo sound.
0
Set “AUDIO MONITOR” in the recording menu.
(“MIX”/“STEREO”) (A p. 63)
3
Adjust the volume level of the headphones.
0
Operate with the [ADJ.] knob.
.
FULL AUTO
DOOR LOCK
A E
SET
GAIN
ADJ.
IRISWHT. BAL
SHUTTER
A F
M F
L-
M-
H-
B -
A -
PRST
[ADJ.] Knob
Memo :
0
The built-in speaker is usable only in the Media mode. Audio is
not output from the built-in speaker during Camera mode.
0
Audio level in the Camera mode and Media mode can be
adjusted separately.
0
When in the Media mode, the volume of the headphone and
speaker are adjusted at the same time.
0
The built-in speaker cannot be used when the headphone jack
is connected.
Shooting
46