JVC GY-HMQ10U Camcorder User Manual


 
4
Tap on the file to start playback.
.
A
60P
60P
MENU
REC
OTHER FILE
Memo :
0
An MTS file is created in the EXTMOV folder when management
information is corrupted.
0
Depending on the condition of the damaged file, playback might
fail or may not run smoothly.
0
Files recorded in the 4K2K mode are not displayed.
Viewing Images on a Monitor
You can connect this camera recorder to a monitor that is equipped
with an HDMI terminal.
0
Use a High Speed HDMI Mini Cable for the HDMI mini cable.
0
Refer also to the instruction manual of the monitor in use.
Caution :
0
Do not remove the SD card or perform any other operation (such
as turning off the power) while accessing files. Also, be sure to
use the provided AC adapter, as the data on the recording
medium may be corrupted if the battery becomes exhausted
during operation. If the data on the SD card becomes corrupted,
format the SD card..
“Formatting (Initializing) SDHC/SDXC Cards” (A p. 30)
Memo :
0
Change the settings in “HDMI OUTPUT” of the common menu
as necessary.
“ HDMI OUTPUT ” (A p. 64)
0
When connected to the monitor via an HDMI cable, images and
sounds may not be output properly depending on the monitor
connected. In such cases, perform the following operations.
- Disconnect the HDMI cable and connect it again.
- Turn off and on this unit again.
0
For questions about the monitor or method of connection,
contact your monitor’s manufacturer.
Playback
51