Filter
Top Products
Clock Setting
The “SET DATE/TIME!” screen appears when you turn on this unit
for the first time after purchase, when it has not been used for a long
time, or when the clock is not set yet.
Set the clock before recording.
1
Set the [STANDBY/ON OFF] switch to [ON].
2
Open the LCD monitor.
3
Tap “YES” when “SET DATE/TIME!” is
displayed.
.
NOYES
SET DATE/TIME!
4
Set the date and time.
.
1
201211000
SET
TIMEDATE
CLOCK SETTING
0
When the year, month, day, hour, or minute item is tapped,
∧ or ∨ will be displayed.
0
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.
5
After setting the date and time, tap “SET”.
6
Select the region where you live and tap
“SAVE”.
.
GMT
SAVE
CLOCK/AREA SETTING
0
The city name and time difference are displayed.
0
Tap <or> to select the city name.
Memo :
0
The configured date/time data can be displayed on the LCD
monitor and viewfinder and be recorded to the SDHC/SDXC
card.
0
The value of the year can be set between the range from “2001”
to “2099”.
0
The clock can be reset again later.
“ CLOCK ADJUST ” (A p. 63)
0
“SET DATE/TIME!” is displayed when you turn on this unit after
it has not been used for a prolonged period.
Connect the AC adapter for more than 24 hours to charge the
internal clock battery of this unit before setting the clock.
“Charging the Battery Pack” (A p. 24)
o
Changing the date/time display style
You can change the display style of the date/time on the menu.
“DATE DISPLAY STYLE” (A p. 63)
o
Date/Time Display in Different Operation Modes
During Camera
mode
Date/time of the built-in clock is displayed.
During Media
mode
Shooting date/time of the file (image) being
played back is displayed.
Preparations
26