Filter
Top Products
Audio Recording
Applicable to: Camera mode
There are two ways to input audio sound.
A Built-in microphone
B [INPUT1] terminal / [INPUT2] terminal
0
The priority order of the input is in the sequence of B>A.
0
When you want to use the built-in microphone, remove the audio
unit cable from the [AUDIO IN] terminal.
0
To use the [INPUT1/INPUT2] terminal, an optional microphone
is needed.
.
[INPUT1/INPUT2] terminal
Audio Unit Cable
Built-in microphone
Setting the Reference Audio Recording Level
Applicable to: Full Auto shooting mode A, Manual shooting mode
M
o
Menu setting
Set “AUDIO REF. LEVEL” in the recording menu.
(“-20dB”/“-12dB”) (A p. 62)
Using the Built-in Microphone
Applicable to: Full Auto shooting mode A, Manual shooting mode
M
o
Setting the input level.
Set “INTERNAL MIC LEVEL” in the recording menu (“-2” to “+2”).
(A p. 62)
Using an External Microphone Connected to
the [INPUT1/INPUT2] Terminal
* Microphone is optional.
Applicable to: Full Auto shooting mode A, Manual shooting mode
M
Preparation: Connect a microphone to the [INPUT1/INPUT2]
terminal.
Terminals
Audio Input
INPUT1 Input to [CH1(L)] at all times. Input to [CH2(R)] can
be enabled using the [CH-2 INPUT] switch.
INPUT2 Input to [CH2(R)] can be enabled using the [CH-2
INPUT] switch.
o
Selecting [CH-2] audio
Configure the [CH-2 INPUT] switch.
0
INPUT1: Inputs audio from the [INPUT1] connector to [CH-2].
0
INPUT2: Inputs audio from the [INPUT2] connector to [CH-2].
Memo :
0
Audio from the [INPUT1] connector is also input to [CH-1]
regardless of the setting.
o
Selecting the audio input to the [INPUT1] or [INPUT2]
terminal
Configure the [AUDIO INPUT 1/2] switch.
Item
Details
LINE Use this setting when connecting to an audio device
or other equipment.
MIC Use this setting when connecting to a dynamic
microphone.
MIC+48V Use this setting when connecting to a microphone
that requires a +48V power supply (phantom
microphone).
Caution :
0
When connecting a device that does not require a +48 V power
supply, make sure that it is not set to the [MIC+48V] position.
Shooting
45