Filter
Top Products
Troubleshooting
Ifyou encounter problems with this unit, check the following before requesting service.
1 Refer to "Trouble" below.
2 Refer to the "Troubleshooting" section in the "Detailed User Guide".
Ifyou have difficulties operating the unit, refer to the detailed descriptions inthe "Detailed
User Guide".
• http://manual.jvc.co.jp/index.html/
3 Refer to the FAQ of new products on JVC's website.
• http://wwwjvc.com/
4 This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
Insuch a case, reset the unit.
Turn off the power. (Close the LCD monitor.)
Remove the AC adapter and battery pack from this unit, reattach them, open
the LCD monitor and this unit powers on automatically.
5 If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
• The battery pack is being charged. 10
• Check the _ / _ button.
• Set to the recording mode by tapping
the [o[._q button.
• Turn off this unit, wait for a while, and
turn iton again. (This unit stops
automatically to protect the circuit when
the temperature rises.)
• Recording stops automatically after 12
hours of continuous recording.
• Sometimes playback isinterrupted at
the connecting section between two
scenes. This is not a malfunction.
15
18
.
.
For more information, refer to the Detailed User Guide
34 http://manual.jvc.co.jp/index.html/