Filter
Top Products
®Forsafety,DONOT
...openthecamcorder'schassis.
...disassembleormodifytheunit.
...allowinflammables,waterormetallicobjects
toentertheunit.
...removethebatterypackordisconnectthe
powersupplywhilethepowerison.
...leavethebatterypackattachedwhenthe
camcorderisnotinuse.
...placenakedflamesources,suchaslighted
candles,ontheapparatus.
...exposetheapparatustodrippingorsplashing.
...leavedustormetalobjectsadheredtothe
powerplugoranACwalloutlet.
...insertanyobjectsinthecamcorder.
®Avoidusingtheunit
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as near
a cooking stove.
...in places subject to excessive shock orvibration.
...near atelevision set.
... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40°C
or 104°F) or extremely low (under 0°C or 32°F)
temperatures.
® DO NOT leave the unit
... in places of over 50°C (122°F).
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on aTV. Leaving the
unit in high places while a cable is connected
may result in a malfunction ifthe cable is
caught and the unit falls onto the floor.
® To protect the unit, DO NOT
...allow itto become wet.
...drop the unit or strike itagainst hard objects.
...subject itto shock or excessive vibration
during transportation.
... keep the lens directed at extremely bright
objects for long periods.
...expose the lens to direct sunlight.
... swing itexcessively when using the hand strap.
...swing the soft camcorder case excessively
when the camcorder is inside it.
...store the camcorder ina dusty or sandy area.
® To prevent the unit from dropping,
®Fasten the grip belt securely.
®When using the camcorder with a tripod,
attach the camcorder to thetripod securely.
If the camcorder drops, you may be injured
and the camcorder may bedamaged.
When a child uses the unit, there must be
parental guidance.
Declaration of Conformity
Model Number : GZ-HM960U/GZ-HM860U
Trade Name :JVC
Responsible party : JVC AMERICAS CORE
Address : 1700 Valley Road Wayne, N. J. 07470
Telephone Number :973-317-5000
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not approved by
JVC could void the user's authority to operate
the equipment. This equipment has been
tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference ina residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation, tf this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on,the user is encouraged
to try to correct the interference by one or more
of the following measures: Reorient or relocate
the receiving antenna. Increase the separation
between the equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/
TV technician for help.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numerique de laclasse Best
conforme b.la norme NMB-003 du Canada.
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/ 37