Filter
Top Products
16
Be sure to confi gure the following three
settings before use.
Charging the Battery Pack
1 Set the power/mode switch to OFF.
Slide while pressing down the lock button.
OFF
(CHARGE)
2 Attach the battery pack.
Slide the battery pack down until it locks
in place.
BATT.
3 Connect the AC adapter.
•
The access/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the AC adapter from the
AC outlet and disconnect the AC adapter
from the camera.
Required charging / recording time
(approx.)
Battery pack Charging time
Recording
time
BN-VF815U
(Provided)
2 hr. 40 min.
1 hr. 20 min.
(1hr. 25 min.*)
BN-VF823U 3 hr. 50 min.
2 hr. 00 min.
(2 hr. 10 min.*)
* When using the viewfi nder.
8 To detach the battery pack
Slide and hold BATT. (੬ step 2), then
remove the battery pack.
8 To check the remaining battery power
See page 18.
NOTES
•
You can also use the camera with just the
AC adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Set Lever
Power/Mode
Switch
Access/Charge
Lamp
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)
Necessary Settings before Use