Filter
Top Products
20
Video Recording
Preparation: Set the power/mode switch to STANDBY/ON.
Press the PLAY/REC button to
select recording mode.
PLAY/REC
SELECT
Press the REC button to start
recording.
REC
REC
[4h59m]
Approximate remaining time for
recording appears.
8 To stop recording
Press the REC button again.
8 To change the picture quality
Change the settings in [QUALITY].
(੬
pg. 68)
8 To register a fi le to an event
See page 23.
Slide the power/mode switch to
MODE to select (video) mode.
MODE
The switch returns
to the original
position when it is
released.
The lamp on the camera lights up.
NOTES
•
The video recording mode is automatically selected when you turn the camera’s power off and
then on again.
•
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the
power/mode switch to OFF, then to STANDBY/ON. When using the AC adapter, perform any
operation such as zooming.
•
Video fi les are given the names MOV001.TOD to MOV009.TOD, MOV00A.TOD to
MOV00F.TOD, and MOV010.TOD in order of recording.
•
A new fi le will be created for every 4 GB or approx. 19 minutes of continuous shooting.
•
This camera records video in MPEG2 format compliant with SD-VIDEO format.
•
Do not move or shake the camera suddenly during recording. If you do so, the sound of the
hard disk drive may be recorded.
RECORDING
Recording Files