Filter
Top Products
76
Trouble Action
੬
Playback
Playback cannot be
performed.
•
Select the recording medium properly.
•
To watch images on a TV, set the TV’s input mode or
channel that is appropriate for video playback.
68, 69
37
The black & white
fader does not work.
•
Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
34
There is a noise
during playback.
•
The sound of the hard disk drive may have been
recorded if the camera was moved suddenly during
recording. Do not move or shake the camera suddenly
during recording.
–
During video
playback, the U
indicator fl ashes.
•
The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
–
Aspect ratio of the
image is strange
when watching
images on your TV.
•
Change the settings in [VIDEO/S OUTPUT] so that it
matches the screen size of the connected TV.
71
When outputting from
the HDMI connector,
a part of the TV
screen appears to be
shaking.
•
Set [HDMI OUTPUT] to [AUTO]. 71
Some functions
cannot be used when
using the camera
to playback a disc
created with a DVD
burner.
•
Some functions cannot be used when playing back a
disc that was created with a DVD burner. (E.g.: Slow-
motion playback, frame-by-frame playback, playback
effects etc.)
–
Other problems
Files cannot be
deleted.
•
Remove protection from the fi les and delete them. 38
The data process is
too slow after the
power is switched
on or the mode is
changed.
•
There is a large number of still images (approx. 1,000 or
more) stored in the recording medium. Copy the stored
fi les to other devices, and delete them from the recording
medium.
47, 53
The SD card cannot
be removed from the
camera.
•
Push the SD card in a few more times. 19
Troubleshooting (Continued)