Filter
Top Products
21
ENGLISH
Still Image Recording
Preparation: Set the power/mode switch to STANDBY/ON.
Slide the power/mode switch to
MODE to select (still image)
mode.
MODE
The switch returns
to the original
position when it is
released.
The
lamp on the camera lights up.
Press the PLAY/REC button to
select recording mode.
PLAY/REC
SELECT
19
Press and hold the SNAPSHOT
button halfway.
[
FINE
1920
The indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button to
start recording.
PHOTO
[9999]
FINE
20
NOTES
•
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the
power/mode switch to OFF, then to STANDBY/ON. When using the AC adapter, perform any
operation such as zooming.
•
The sides of still images recorded in 16:9 size may be cut off when printed. Check whether
16:9 size prints can be printed at your local print store.
8 To change the picture quality
Change the settings in [QUALITY].
(੬
pg. 69)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to
[ON]. (੬
pg. 69)
8 To change the image size
Change the settings in [IMAGE SIZE].
(੬
pg. 69)