Filter
Top Products
10
Selecting a Desired Camera
2. BASIC OPERATIONS
CAMERA SELECTION
1.
Press the CAMERA button so that the indicator lights up.
2.
Input the camera number using the numeric keys (0 to 9).
The input figure is shown in the
CAMERA display together with
a period after it. (Example: When
“8” is input)
To clear the input figure, press
the CLEAR button.
3.
Press the ENTER button to enter the input camera number.
The video of the selected camera will be output from the
MONITOR OUTPUT connectors on the rear panel.
At this time, the period in the CAMERA display disappears
and the POSITION display shows the camera operation
details (position, fixed camera, AUTO PATROL, AUTO
PAN, etc.).
NOTES
● When no camera is connected to a camera number,
the camera number is skipped.
● Be sure to set each camera ID to the same number
as the corresponding VIDEO INPUT connector. Er-
roneous settings may cause operational difficulties.
4.
To view the video of the next camera number, press the +
button. To view the video of the previous camera number,
press the – button.
CLEARCLEAR
/HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1
OPTIONOPTION
2
CAMERACAMERA
POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILT
CAMERA/POSITIONCAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
RM-P2580RM-P2580
ALARMALARM
POPOWERWER
K
EY LOCK
K
EY LOCK
CAMERA
button
Numeric key
buttons
+ buttonCLEAR button
ENTER button
- button
CAMERA display POSITION display
CAMERA
Period
Camera operation details
NOTES
● “Camera video” is one of the video signals input to
the VIDEO INPUT connector of this unit or to the frame
switcher.
● In the case of the B mode in which the output video is
controlled by the frame switcher, in order to allow cam-
era selection from this unit, connect the SERIAL-2
connector on the rear panel of the unit with the RS-
232C connector of the frame switcher. (SW-D7000/
SW-D8000)( REF. : “APPLIED SYSTEM (B MODE)”
on page 22.)
POSITION POSITION
POSITION POSITION
Fixed camera display
Position display
(Example with the
home position)
AUTO PATROL
( REF. : Page 15)
AUTO PAN
( REF. : Page 14)